欢迎访问南通迅达橡塑制造有限公司官方网站!

产品展示Product category

电梯平衡补偿链

您的当前位置:首页 > 产品展示 > 电梯平衡补偿链
WFU包塑电梯平衡补偿链
发布时间:2016-4-18 14:44:09  阅读:1740

WFU包塑电梯平衡补偿链选用优质电焊锚链外裹一层PVC加工而成,其优点是弹性好、弯曲半径小、阻燃、耐老化。适用于1.75m/s以下的中低速电梯。

Plastic-wrapped elevator balance compensation chain is made of best welding anchor chain, wrapped by synthetic PVC, and the surface has been specially anti-rust treated, then processed by special techniques.It has below strong traits such as: flexible, small curve radius, fire-resistant, wear-resistant, noise-resistant , anti-aging and not vulnerable to be split out. It can be used for the elevator with rated speed below and equal to 1.75m/s.

1.本产品的使用温度适应范围为-25℃~50℃。

2.安装时应去除平衡补偿链在卷曲过程中产生的螺旋、缠绕状后,方可以安装使用,否则会影响其使用寿命及运行效果。

3.导向装置中心线与悬挂点应保持在同一垂直线,防止平衡补偿链与导向装置应摩擦增加产生故障。

4.导向装置安装点距平衡补偿链弯曲底部最小距离为1.0米,否则因弯曲半径过小会产生运动阻力,造成断链事故。

1.The suitable temperature range of the product is -25℃~50℃.

2.When you are ready to install the compensation chain , it is necessary to straight the chain first , or it will affect the running effect and service life.

3.The center line of the damping device and the suspension point should be in the same perpendicular line in order to reduce the friction between the compensation chain and the damping device.

4.The minimum distance is one meter between the installation point of the damping device and the curve bottom of the compensation chain. Otherwise it may cause the accident.


版权所有 © 南通迅达橡塑制造有限公司 苏ICP备2342364号 联系人:王小姐 手机:13083575587
电话:0513-88836619  QQ:1029766754  地址:江苏省南通市海安县三塘工业园铭豪路33号
技术支持:南通乐途网络科技有限公司
13083575587